What are the access control system consisting of equipment
Release date:2016-01-13
Composition of the access control system: access control
The core of the access control system, the equivalent of a computer's CPU, which is responsible for the entire system input and output of information processing and storage, control, etc.
Card reader (identification device)
Read card data (biometric information) devices.
The access control system consisting of: electric lock
Access control system to lock the door of the execution unit. Users should be based on the material of the door, go out requirements needs to select different locks. There are the following types:
(1) Electromagnetic lock: electromagnetic lock after power is open, in line with fire safety requirements. And is equipped with a variety of mounts for customers to use. This lock is suitable for one-way doors, glass doors, fire doors, electric door off.
(2) Anode lock: anode is power door lock type, meet fire safety requirements. It is installed in the upper part of the door frame. The difference is that the electromagnetic lock anode lock suitable for two-way doors, glass doors, fire doors, and it itself has magnetic door detector can detect the security status of the door at any time.
(3) Cathode lock: general cathode type door lock is energized. Applicable one-way doors. Cathode lock installation must be equipped with UPS. Because the power of the female lock is to lock the door.
The access control system consisting of: Card
IC and ID card has two categories; the relative safety of high class IC card standard 54X86MM; as well as various special-shaped key ring card. You can be printed on the card the cardholder's personal photos, door cards, badges combined.
Other equipment
Exit button: Click to open the device door, suitable for the case to go unlimited.
Magnetic: Security / switch status detection gates and the like.
Power: The entire system is powered equipment and back-up is divided into two general (with battery).
Broken glass buttons: General Electric lock loop is connected in series inside, to prevent the reader access control system, the left button or the controller hardware failure inside people open the door, it was locked in the house. Broken glass, then press the button, the door will be open.